up Inquisit Language Reference

rwstimulus attribute

The rwstimulus attribute specifies the stimulus to display during the response window interval.

Member of

<response>

Syntax

/ rwstimulus = stimulusname

Parameters

stimulusname The name of a stimulus defined elsewhere in the script that should be presented if the response occurs withing the window.

Remarks

The response window stimulus can be any stimulus type, including text, picture, sound, video, port, or shape.

Examples

The following response defines a response window with an initial center of 500 ms and width of 150 ms. A black exclamation point appears on the screen during the window. If the response is in the window, it turns green and remains on teh screen for 300 ms. Otherwise it turns red. The window is incremented by 75 ms if the mean latency for the block is greater than the current center + 50 ms and the percent correct is less than 60%. The window is decremented if the mean latency for the block is 50 ms earlier than the window center and the percent correct is greater than or equal to 80%. The maximum window center 1000 ms and the minimum is 200 ms:

<response windowprocedure>
/ mode = window
/ rwcenter = 500
/ rwwidth = 150
/ rwinccondition = [(60, 50)]
/ rwdeccondition = [(80, -50)]
/ rwincunit = 75
/ rwdecunit = 75
/ rwmincenter = 200
/ rwmaxcenter = 1000
/ rwlatencymetric = mean
/ rwstimulus = blackexclamationpoint
/ rwhitstimulus = greenexclamationpoint
/ rwmissstimulus = redexclamationpoint
/ rwhitduration = 300
</response>

Send comments on this topic:
Copyright Millisecond Software, LLC. All rights reserved.