send trigger to trigger station

Back

send trigger to trigger station

Author	Message
eleonora_parr	eleonora_parr posted 3 Years Ago Topic Details Share Topic
Group: Forum Members Posts: 40, Visits: 148	Dear Inquisiters, I am programming an experiment in which at the end of each trial I'd need to send a trigger to a trigger station which then activates a Digitimer electrical stimulator. The thing is that the trigger should be sent either to a BNC1 OR to a BNC2 cable, depending to the specific condition (pain VS. safe) to which the trial is associated. Indeed, these two cables are connected to two different stimulators (BNC1 is connected to a stimulator that will deliver a painful stimulation and BNC2 to a second stimulator that will deliver a soft stimulation, so if the trial belongs to a safe condition, the trigger at the end of the trial should be sent to BNC2, while if the trial is a "pain" trial the trigger should be sent to the BNC1 cable). Is that possible? And if so, how should this be implemented correctly? Thank you very much to all of you. Eleonora
	Reply Like 2
Dave	Dave posted 3 Years Ago ANSWER Post Details Share Post
Group: Administrators Posts: 12K, Visits: 98K	+x eleonora_parr - 4/22/2021 Dear Inquisiters, I am programming an experiment in which at the end of each trial I'd need to send a trigger to a trigger station which then activates a Digitimer electrical stimulator. The thing is that the trigger should be sent either to a BNC1 OR to a BNC2 cable, depending to the specific condition (pain VS. safe) to which the trial is associated. Indeed, these two cables are connected to two different stimulators (BNC1 is connected to a stimulator that will deliver a painful stimulation and BNC2 to a second stimulator that will deliver a soft stimulation, so if the trial belongs to a safe condition, the trigger at the end of the trial should be sent to BNC2, while if the trial is a "pain" trial the trigger should be sent to the BNC1 cable). Is that possible? And if so, how should this be implemented correctly? Thank you very much to all of you. Eleonora Inquisit can trigger external equipment via the parallel port, the serial port, or it can make use of a Cedrus StimTracker. https://www.millisecond.com/support/docs/v6/html/language/elements/port.htm https://www.millisecond.com/support/docs/v6/html/howto/howtosendport.htm https://www.millisecond.com/support/docs/v6/html/howto/cedrusstimtracker.htm If your trigger station has serial or parallel port input connectors and can route to the desired BNC output based on the TTL signal received, then you can make things work. If your trigger station does not support serial or parallel port input, then no.
	Reply Like 2
eleonora_parr	eleonora_parr posted 3 Years Ago ANSWER Post Details Share Post
Group: Forum Members Posts: 40, Visits: 148	+x Dave - 4/22/2021 +x eleonora_parr - 4/22/2021 Dear Inquisiters, I am programming an experiment in which at the end of each trial I'd need to send a trigger to a trigger station which then activates a Digitimer electrical stimulator. The thing is that the trigger should be sent either to a BNC1 OR to a BNC2 cable, depending to the specific condition (pain VS. safe) to which the trial is associated. Indeed, these two cables are connected to two different stimulators (BNC1 is connected to a stimulator that will deliver a painful stimulation and BNC2 to a second stimulator that will deliver a soft stimulation, so if the trial belongs to a safe condition, the trigger at the end of the trial should be sent to BNC2, while if the trial is a "pain" trial the trigger should be sent to the BNC1 cable). Is that possible? And if so, how should this be implemented correctly? Thank you very much to all of you. Eleonora Inquisit can trigger external equipment via the parallel port, the serial port, or it can make use of a Cedrus StimTracker. https://www.millisecond.com/support/docs/v6/html/language/elements/port.htm https://www.millisecond.com/support/docs/v6/html/howto/howtosendport.htm https://www.millisecond.com/support/docs/v6/html/howto/cedrusstimtracker.htm If your trigger station has serial or parallel port input connectors and can route to the desired BNC output based on the TTL signal received, then you can make things work. If your trigger station does not support serial or parallel port input, then no. Thank you so much Dave, I'll have a try then! Ele
	Reply Like 2