parallel port address

Back

parallel port address

Author	Message
avtobin	avtobin posted 6 Years Ago Topic Details Share Topic
Group: Forum Members Posts: 6, Visits: 13	Hello all, I am moving my inquisit experiment from one EEG system to another (previously neuroscan, now using biosemi). I have cut/pasted the code that I have used previously to send an EEG signal from the presentation to the recording computer below. I need to change the parallel port address to &HD040 . However an error has presented to say that the parallel port address &HD040 is not a valid setting. Any advice with this would be appreciated. <port EEGsignal> / port = lpt3 / subport = data / items = ("00000001", "00000011", "00000101") / select = values.N </port> <port EEGsignal2> / port = lpt3 / subport = data / items = ("00000010", "00000100", "00000110") /select = values.N </port> <port EEGsignaloff> / port = lpt3 / subport = data / items = ("00000000") </port>
	Reply Like 58
Dave	Dave posted 6 Years Ago ANSWER Post Details Share Post
Group: Administrators Posts: 12K, Visits: 98K	+x avtobin - Tuesday, March 6, 2018 Hello all, I am moving my inquisit experiment from one EEG system to another (previously neuroscan, now using biosemi). I have cut/pasted the code that I have used previously to send an EEG signal from the presentation to the recording computer below. I need to change the parallel port address to &HD040 . However an error has presented to say that the parallel port address &HD040 is not a valid setting. Any advice with this would be appreciated. <port EEGsignal> / port = lpt3 / subport = data / items = ("00000001", "00000011", "00000101") / select = values.N </port> <port EEGsignal2> / port = lpt3 / subport = data / items = ("00000010", "00000100", "00000110") /select = values.N </port> <port EEGsignaloff> / port = lpt3 / subport = data / items = ("00000000") </port> You should be able to specify a non-standard address via the <defaults> element's /lptaddresses attribute in your script: https://www.millisecond.com/support/docs/v4/html/language/attributes/lptaddresses.htm I.e. <defaults> ... / lptaddresses = (lpt3=D040) ... </defaults> Make sure that the base address is indeed correct by double-checking it via the system's device manager. Also make sure that the port you're using is indeed LPT3, otherwise adjust the port number in the above accordingly.
	Reply Like 53
avtobin	avtobin posted 6 Years Ago ANSWER Post Details Share Post
Group: Forum Members Posts: 6, Visits: 13	+x Dave - Wednesday, March 7, 2018 +x avtobin - Tuesday, March 6, 2018 Hello all, I am moving my inquisit experiment from one EEG system to another (previously neuroscan, now using biosemi). I have cut/pasted the code that I have used previously to send an EEG signal from the presentation to the recording computer below. I need to change the parallel port address to &HD040 . However an error has presented to say that the parallel port address &HD040 is not a valid setting. Any advice with this would be appreciated. <port EEGsignal> / port = lpt3 / subport = data / items = ("00000001", "00000011", "00000101") / select = values.N </port> <port EEGsignal2> / port = lpt3 / subport = data / items = ("00000010", "00000100", "00000110") /select = values.N </port> <port EEGsignaloff> / port = lpt3 / subport = data / items = ("00000000") </port> You should be able to specify a non-standard address via the <defaults> element's /lptaddresses attribute in your script: https://www.millisecond.com/support/docs/v4/html/language/attributes/lptaddresses.htm I.e. <defaults> ... / lptaddresses = (lpt3=D040) ... </defaults> Make sure that the base address is indeed correct by double-checking it via the system's device manager. Also make sure that the port you're using is indeed LPT3, otherwise adjust the port number in the above accordingly. Hello, Thank you Dave I will try this in my script today and update the thread if/when successful. Much appreciated!
	Reply Like 57